Mineral Water Processing Machine (UF 1T/H to 5T/H)

Low cost and easy operation Water stability good quality and

Technics flow chartmine water tank→→ mine water pump→→filter→→ active carbon osculum→→precision filter→→hyper-filter setting→→UV→→ clarifier→ douche machinecleanout system   

      

 Composition of Water Treatment System 1. Pre-treatment System. Pre-treatment system is composed of mechanical filter, active carbon filter and precision filter. The water temperature requires 25± 3° C. Mechanical filter can remove most of suspension, colloid and grain impurity, which can ensure initial purification of water. 2. UF system UF system is composed of high-pressure pump, UF system and chemical cleaning device. During running, UF membrane may form some deposit and chemical cleaning device is equipped for periodical cleaning to ensure stable running of UF system. High-pressure pump is the power source of UF system. To UF system on sound running condition, high-pressure pump equips inlet/outlet pressure switch. When inlet pressure is less than set value (water lack P≤ 0.05Mpa) or outlet pressure is higher than set value, pressure switch send signal to PLC programming system and high-pressure pump and UF system will stop in avoidance of destroying to UF membrane because of water pressure.

UF system can wash surface of UF membrane by low-pressure timely and periodically.

NO.	Machine name	Qty.
1		Raw Water Tank	1 set
2		Raw Water Pump
3		Quartz sand filter	1 set
4		Active carbon filter	1 set
5		Sodium ion exchange	1 set
6		Precision filter	1 set
7		Ultra-filter	1 set
8		Ozone generator	1 set
9		Ozone mixer	1 set
10		Pure water pump	1 set
11		Pure water tank	1 set
12		Piping and valves	1 set

Mineral Water Processing Machine (UF 1T/H to 5T/H)